• WANTED: Happy members who like to discuss audio and other topics related to our interest. Desire to learn and share knowledge of science required as is 20 years of participation in forums (not all true). There are daily reviews of audio hardware and expert members to help answer your questions. Click here to have your audio equipment measured for free!

Quandry about MiniDSP Flex, Subpac and no signal being received.

1niltothe

Member
Joined
Jun 27, 2021
Messages
28
Likes
9
I'm sure it's something minor, but currently can't see what.

Subpac connected via an audio jack to output 4 on MiniDSP Flex. No signal being received.

I have tested the signal chain via laptop headphone port and it all works fine.

The other 3 outputs (2 monitors and a subwoofer) all work fine.

I have tried swapping the Subpac + jack to another channel, still no juice.

There are no filters or EQ or any processing on any of the channels.

Just got the MiniDSP Flex in the mail today, so not that familiar with it yet.

Wondering if anyone has thoughts on what might be going on.

FWIW the subpac only takes a 3.5mm jack, so I'm using an adapter to connect to the Flex.

All the best,

Mikey
 
OP
1niltothe

1niltothe

Member
Joined
Jun 27, 2021
Messages
28
Likes
9
Was wondering if anyone had any thoughts on this?

Specifications of the unit are here:

 

Peluvius

Senior Member
Forum Donor
Joined
Aug 5, 2021
Messages
379
Likes
308
I am not familiar with a subpac, looks interesting. Have you tested to see if it is working? Does it just take a standard line output?

Can you log into the flex on your PC to see what is going on with the DDRC-24 plugin graphic?
 

tonycollinet

Major Contributor
Forum Donor
Joined
Sep 4, 2021
Messages
2,722
Likes
3,874
Location
UK/Cheshire
I am not familiar with a subpac, looks interesting. Have you tested to see if it is working? Does it just take a standard line output?

Can you log into the flex on your PC to see what is going on with the DDRC-24 plugin graphic?
Balanced or unbalanced flex?

What about the cable - how is that wired?

Is it a mono cable?

Have you tried it to send audio to another device such as headphones, or powered speaker?
 
Top Bottom