Need advice for mixing space

[LunaRay]

Hi, I usually mix on headphones for 90% of the time (dt1990 + hd600), but I can finally live by myself, what could be done here to improve the listening experience?
I have those MTM before on the desk and they sound way more precise, but the stage was smaller.

Thanks!

 

[kemmler3D]

If you can pull the desk into the center of the room, it should help. Speaker position relative to desk looks OK. I might consider adding some acoustic treatment to the back wall. I would also add a sub or two if you can.

IIRC those speakers are not bad, but of course you can always upgrade there too...

And of course someone will say it: Get a measurement mic and use REW to check the room.

 

[LunaRay]

about speakers: I thinking about kh120 ii, but I am worried they need a sub, and I don't want to disturb neighbours, additional plus for me is that they have room dsp

about measuring, the iloud mic will be good enough? I have also a licence for sonarworks, could be useful?

 

[Flaesh]

Why not use IK ARC software?.. Sonarworks looks more questionable according to this https://www.audiosciencereview.com/...-sonarworks-reference-4-studio-edition.18607/

 

[LunaRay]

Why not use IK ARC software?.. Sonarworks looks more questionable according to this https://www.audiosciencereview.com/forum/index.php?threads/comparison-of-drcs-dirac-live-for-studio-ik-multimedia-arc-system-3-and-sonarworks-reference-4-studio-edition.18607/

I have also IK ARC, but you can't load your profile into MTMs.

But they are good when measuring and setting up your studio?

 

[Flaesh]

your studio?

I'm an unassuming listener of home hi-fi in "far field". Personally, I don’t use room correction at all (link in signature). But I'm curious what other people do.
In any case, I support checking the results of RC with other software, REW is good. And measuring the existing reality as the first step, of course)
Can you place your table like

?..

 

[LunaRay]

No, my flat is not a rectangle ;(