Helicopter
Major Contributor
I would like to measure the output of some tube amps using my 2i2. I am considering getting an oscilloscope too (<$500), but I don't really know if it will be useful.
I am wondering if I have a good dummy load circuit in mind, and how to calculate the values of the series resistors for the measurement parallel circuit.
I want to do a sine wave, multi-tone, etc. I'm pretty sure I won't have any trouble getting tests signals into the amps.
I was thinking about getting an oscilloscope with a budget of about $500 retail, so I would like advice on if that is likely to compliment my 2i2 in this application, and if so, which scope would be recommended.
I'll post pictures from my phone in a moment.
Thanks in advance for the help!
I am wondering if I have a good dummy load circuit in mind, and how to calculate the values of the series resistors for the measurement parallel circuit.
I want to do a sine wave, multi-tone, etc. I'm pretty sure I won't have any trouble getting tests signals into the amps.
I was thinking about getting an oscilloscope with a budget of about $500 retail, so I would like advice on if that is likely to compliment my 2i2 in this application, and if so, which scope would be recommended.
I'll post pictures from my phone in a moment.
Thanks in advance for the help!