dsp

  1. mitchco

    Introducing Hang Loose Convolver from Accurate Sound

    Hello fellow ASR enthusiasts, Just over a year ago @dallasjustice was kind enough to announce my new DSP calibration service here on ASR. Since then, 125 individuals have used my service to calibrate their sound systems. Coming back to my audio roots after decades in the software industry was...
  2. M

    help finding some active speakers with S/PDIF input

    I'm not sure the following is even possible due to how high-frequency sound is perceived in off-axis listening configurations. In any case, here are the 'concept parameters': hardware/audio optical or coax digital input single speaker configuration available (maybe something like a sonos play...
  3. U

    NAD MDC BLUOS UPGRADE

    Hi! A diy project to upgrade the NAD MDC BluOS module was recently completed. The upgrade was to integrate the DSP into the sound received from the BluOS module. The project was successfully completed, and now I can safely share with you the result. The BluOS module now has an ADAU1467 DSP...
  4. D

    Active Crossover Solutions / Feedback / Recommendations

    Closed - looking at Octo Research dac8 PRO, paired w. Roon + Convolution or MiniDSP.
  5. dominikz

    Turning an Amazon Fire TV Stick (2nd gen) into a media player with DSP

    So after looking into some depth at room correction SW, I wanted to see how to implement DSP into my system. Initially I looked at various of-the-shelf solutions, but in the end decided to see if I can work something out myself - ultimately audio DSP is just a bit of computing power combined...
  6. BillG

    PSB Aims to Customize Sound with Audio Personalization Company Audio do...

    https://www.audioholics.com/news/psb-audiodo
  7. J

    Internet Router to DSP to streamer/DAC

    I have an integrated streamer/DAC. I want to be able to use a DSP system for room correction before the signal gets to my streamer/DAC, hopefully directly from my router. I know that ROON, which I'm using, has DSP capability, but it looks fair hard to get properly setup. Are there any devices...
  8. BillG

    Dirac and Klipsch are teaming up for headphones...

    Given all of the attention headphones are receiving here as of late, I thought this might be of interest. It's merely a press release, though, and light on details: https://www.dirac.com/news/2020/6/30/dirac-and-klipsch-collaborate-to-pioneer-the-next-generation-of-headphone-audio-performance
  9. A

    Work on "time domain optimized filters" by M. Moffat

    In his book "Schiit Happened: The Story of the World's Most Improbable Start-Up" Jason Stoddard mentions work done by Mike Moffat on "First true time domain optimized digital filters, based on math perfected with a U of Iowa Professor Emeritus of Mathematics and a RAND Corp mathematician". In a...
  10. MDAguy

    Adding a component with an AD/DA stage downstream from your DAC...‍♂️

    So I listen in a smallish room (Can't change that for a multitude of reasons) with some acoustic issues, nothing too bad, but I'm trying to achieve the best possible sound in this room... ... a friend brought his DSP (Accuphase DG-58) over and we tried it out, and it made a noticeable and...
  11. MDAguy

    Seeking some "sound" advice on installing DSP into my system..

    Hi all, new to the forum but I have been told this was the place to come find no-nonsense advice from people who know the ins and outs of the digital and analogue chain / signal and processing... So here is my situation... I've got a decent Hi-Fi system that I mostly (80%) use for streaming...
  12. MarsianC#

    FreeDSP Aurora with ADAU1452, 8 channel In/Out

    Care to help? https://github.com/freeDSP/freeDSP-aurora Specs: Analog Devices ADAU1452, 294.912 MHz, 32-bit SigmaDSP 6144 SIMD instructions per sample @ 48kHz fs 40kWords of data RAM 800ms digital audio delay pool @ 48kHz fs 8 stereo ASRCs with 139dB DNR XMOS...
  13. A

    Dac - Dsp - Crossover

    Hi, I'm new to this forum and hope you forgive my mistakes. I'm a old audiophile who wants to upgrade his (now) simple system (Oppo BD95 + Pass Labs amp + Magnepan MG 3.3) to multi amping. As everybody says Magnepans should sound better in multiamping (maybe all of the loudspeakers do) and I...
  14. xykreinov

    Active Designs & Their Favorability

    Why are active speaker designs so favorable? Should space be available, why wouldn't you want to have the dac, dsp, and amplification devices be independent of the speaker? This allows for easy upgrades if so desired, as well as more control over the hardware in general; you'll likely choose...
  15. dallasjustice

    Mitch Barnett's New Calibration Service

    @mitchco Mitch Barnett recently launched his Accurate Sound Calibration Service. Mitch has been a great teacher to many. Mitch is a DSP, low frequency optimization and active loudspeaker enthusiast and evangelist. Mitch has written extensively on this topic which includes a complete guide in...
  16. MichaelEA

    DSP basics and FIR Filtering

    I often see questions asking for more information about FIR filtering and the pros and cons. I've put together an article describing some DSP, FIR and IIR basics, and applications in audio. https://eclipseaudio.com/fir-filter-guide/ Let me know if you find this helpful, and/or if there's...
  17. M

    Can't understand something simple

    I read the following sentence in this The Scientist and Engineer's Guide to Digital Signal Processing By Steven W. Smith which talks about ADC & DACs. "For example, suppose that the ones and zeros are represented by 5 volts and 0 volts, respectively. If 80% of the bits in the data stream are...
  18. dc655321

    Integrating DSP Engine into the Linux Audio Stack

    I would very much appreciate some input from the wise members of this site on various aspects of implementing and integrating a convolution engine into the Linux audio stack. I'm thinking of members like @Cosmik , @mansr , @pos, @yue or others that may have some experience digging around in the...
  19. dallasjustice

    JBL M2 Audiolense Digital Crossovers w/Subs

    I first became seriously interested in purchasing the JBL M2 when I was with @amirm at CEDIA 2015. I heard the Harman demo room and was shocked at the sound quality I heard. The Harman demo at CEDIA is like waiting in line for the Pirates of the Caribbean ride at Disney World with my kids...
  20. amirm

    It is All Software!

    It is All Software By Amir Majidimehr [Note: this is an article that was published in the Widescreen Review Magazine] OK, it is not all software but most of it is. What am I talking about? I am talking about video! Yes, video. Please don’t flip the page. Let me explain with a bit of...
Top Bottom