diy speaker

  1. S

    3-way speaker with double waveguide and cardioid bass

    I have been working on this project for a long time, and finally finished it. The concept is simple: a 3-way speaker with full-range directivity control. Design and optimization of waveguides was done with Fusion 360 (modelling) and AKABAK (simulation). I will not bore you with the details, but...
  2. manny11701

    Does every tower need a port?

    I’ve loved hifi audio and have only recently been intrigued with building my own speakers. I’m currently designing a pair with a TMM orientation, but one thing that I’ve noticed is that almost all tower speakers in the retail market have a port. Is this necessary to design a good tower...
  3. A

    Preferred Target FR Curve

    Hi Everyone! TLDR; what's your preferred FR Curve and EQ goals when using DSP? I've built my own pair of speakers of my own design, you can find my write up of it here: Still Haven't Named Them. I stopped messing with them for a bit and am very happy with its sound signature except I found...
  4. I

    CSS Criton 1TD-X "living room" build

    Hi All, I'd be happy to photo-log my DIY work on building my CSS Criton 1TDX speakers. I'm not a woodworker neither an electrical engineer (though have some understanding of the former), however I'm really pleased with the result. Another important thing to mention - I've made all my build...
  5. Shefffield

    Introduction to forum: digital speaker DIY enthusiast

    Hello, Amir! Hello, Forum! I found my way to this website through Floyd Toole's book and Amir's excellent YouTube channel. I'm hoping to find a similarly grounded approach to our fascinating hobby here. Who am I? I guess my 'hifi career' has been fairly typical until roughly 12 years ago. The...
    • Shefffield
    • Thread
    • active loudspeaker digital crossover digital filter digital room correction directivity diy speaker fir filter
    • Replies: 16
    • Forum: DIY Audio Forum
  6. B

    Hardwood vs. MDF for a DXT-MON build.

    Well, I'm getting my act together to build a pair of DXT-MONs. Purchased the plans a year ago! I will have to join a maker space to access a proper table saw, thickness planer. My plan is to build to the spec. *but* substitute Dark Walnut hardwood for the specified 19mm and 38mm MDF...
  7. prasanth.nath

    Got Scanspeak Revelator 15W/8530K00 and Scanspeak Tweeter D2904/980000 - What to build?

    Greetings. I have an ellam 98 mk II http://www.troelsgravesen.dk/Ellam98-mkII.htm designed by Troels Gravesen of Denmark. I made the terrible mistake of buying a JBL 305 mk II recently, because of the one-man-industry-disruptor we all know about. To my utter horror, the ellam is thoroughly...
Top Bottom