asking for help

  1. L

    AT LP60X buzzing when connected to amplifier

    Hello everyone, So I recently bought a Fosi BT10A amplifier to use my new speakers with my LP60X. Previously, I had my turntable connected to some active speakers using a male to male 3.5 cable and everything worked perfectly, no buzzing. Now, however, when the tt is connected to the amplifier...
  2. Florin Andrei

    does anyone have the good old Dirac Live linear target curve?

    For many years, I've used Dirac Live on a miniDSP nanoAVR HD for a 5.1 system where all connections were HDMI. I set it up once and it worked flawlessly for a long time. Recently, I moved things around, so a re-calibration was necessary. Also, the nanoAVR HD is not supported anymore, the old...
  3. N

    Whats causing this dip in speaker response?

    So I recently changed my rear atmos speakers to xtz atmosphere s2. I had very small sat speakers (monitor audio mass sat gen 2) up there before. There looks to be a -15db dip at 5k? to about 10k. What has caused this? Its an identical dip for the top rear left and right speaker The first photo...
  4. R

    topping dx3 + absolute nightmare so far

    So the first week after buying it new. It worked great with my Dan Clark Headset. But after that week i noticed my PC Bugging out and crashing. It now keeps cutting out for a second or 3 any moment. i have tried resetting it. updating the firmware. using different format from 16 -32 bit. and...
  5. SabreVenga

    Please, for the love of God - Help me. Revel Performa 3 M106.

    As green as green can be here. I know nothing. And I mean -anything- I don't know what a DAC is, Amplifier, aren't they for guitars? Pre-Amp? Sub? Please help me I'm stressed beyond belief. I've bought a Revel Performa 3 M106 - No clue if it's any good but heard good things and I'm impulsive...
  6. R

    Help connecting dac/amp stack to active speaker

    Hello i want to ask some question about connecting dac amp stack to active speaker. So i have ifi zen air dac connected to a headphones (as im planning to also upgrade to a decent planar headphones in the future) and active speakers the speaker brand is edifier r1280ts via the rca at the back...
  7. X

    I need a new AVR and I need help deciding.

    I find myself in a bit of a conundrum when it comes to choosing between the Denon AVR-S760H and the Arcam AVR10 for my home theater setup. The Denon is a 7.2 channel receiver, available as a refurbished unit on Amazon, whereas the Arcam is a 7.2.4 channel receiver offered as an open box item...
  8. R

    Please help with speaker placement in my awkwardly shaped room

    Dear ASR members, Could anyone advise which speaker arrangement would be more favorable for me in this type of room ? The size is between ~12-16 sq m I don't remember clearly. The proportions are pretty much accurate that I drew in paint. No room treatment nor room correction yet. If needed I...
  9. highersoundlover

    sundara or other choice

    hello,everyone,recently this headphone is drop to 120$(bargain and in China) ,is it better than he400i2020 Also open to new brand,but wanna good high frequency (some nagging) I use he400se for long time,its high frequency makes me fell excited ,but Hifiman's build quality is sad,now its volume...
  10. T

    JBL CSS10 Subwoofer stuck in standby

    Hello, I recently got this subwoofer in a package deal. But I can't seem to get it to come out of standby mode. There is a AUTO/ON switch, but this does not do anything. Tried LFE and Line In but the sub is not turning on from a signal. I have opened it up tried checking for blown caps (not...
  11. L

    Newbie finding a headphone for tarkov + in general

    Introduction: Hello, I am looking to upgrade my JBL QUANTUM 400 to something better. My preference is headphones that can hear Tarkov's enemies' footsteps really well and are nice to listen to music with. After 2 days of searching, I became overwhelmed and got lost on what to get. I have been...
  12. L

    Volume wheel not responding on line out on Fiio K7

    Perhaps I have a faulty unit but the volume wheel on my Fiio K7 does not change the volume when in line out mode to my Edifier 1280dbs speakers? It works when using my headphones connected from the front but it doesn't respond to change the volume up or down when in line out - any ideas?! I...
  13. T

    Second hand IEMs — how to check if they are not damaged?

    I've purchased IER-M9. Blind purchase, and the sound they output is "weird" on any source. Before that I've owned Moondrop Blessing 2, and they sounded much closer to my dynamic headphones. Now I'm wondering if something's wrong with the headphones I got (some form of internal damage), but i...
  14. 1

    Good outside audio blocking headphones solely for listening to music/gaming

    Hello, I'm looking for some decent noise-cancelling headphones for listening to music and gaming. I value general audio quality and soundstage the most, for reference I previously used the sennheiser hd 599s and those were great (besides comfort factor) so I'm looking for something comparable to...
  15. Bling Guy McSqueezy

    please please help me out - 6xx + pc38x , need dac and amp.

    Hi friends, I'm been on a two month search for the perfect DAC and amp for my new 6xx. I'm so tired, and the fact that I'll have to pay high taxes and quite a few shipping fees for SCHIIT products, make it even more painful. I have 6xx and Drop PC38x for gaming with a built-in microphone...
  16. S

    $100-ish budget dac amp for sundara?

    Is there such thing as decent $100 dac amp or should i just save up? I don't see myself upgrading headphone in the near future (most likely will only side grade) so sundara is all I want to drive. Btw I live in Indonesia, all the schiit/topping/jds stack cost like $350-$400 (same as my sundara)...
  17. U

    Kanto YU4P Questions For Amateur

    Hi, I recently purchased the Kanto YU4P's due to price and mainly the dimensions due to limited space in my setup. I think they sound really good but, i'm looking for a really good pair of speakers in the sub $300 range that have a similar footprint to the YU4P's. Someone suggested PSB Alpha...
  18. Bling Guy McSqueezy

    OK - need a DAC & AMP for 6xx's

    I just got my first serious new headphones - 6xx. I am currently connecting them directly to the motherboard - the sound is amazing! But I'm sure an external DAC and amplifier will give me a lot more. I considered purchasing the Schiit Modius + Asgard 3. The final price came out to me at...
  19. bvhme

    What is the right cross-over frequency using subwoofers (Monolith 15in) with Kef R11s on my NAD M33

    Hey speaker folks! I'm relatively unexperienced in setting up systems, however I've decided to upgrade mine last week. I've upgraded to a NAD M33, Kef R11 and have also bought 2 Monolith 15in subwoofers (last still in transit). With the black friday and some bargain hunting I've composed this...
  20. L

    Intermittent buzzing on Topping L30/E30 setup

    Basically I get this random buzzing, it's 5-7 short 1-3 second buzzes of sound, at a sort of mid pitch (the pitch is the same all the time), and then it stops. It happens randomly, some times it's every 15 minutes, other times it could be an hour between instances. I tried a couple pairs of...
Back
Top Bottom