Apologies for the crappy pic and the mess. The speakers are on either side of the recliner about 2 to 2 and a half feet from the side walls. Approximately at the middle of the room probably closer to the front wall. The recliner when reclined listening position is probably 1/3 of the room near the back wall. The messy portion with all of the stuff on top of it near the right speaker is the sub. Normally, speakers are behind the 120 inch screen at the front. However, I tried to follow the genelec recommendations on speaker placement and considering the output of the 8030c's.
I did a bunch of measurements today without moving the mic same position as the pic above.
Left speaker no crossover
Right Speaker no crossover
Sub only no crossover.
Unfortunately, I forgot to label the measurements for left with sub and right with sub and I don't want to guess which of the numerous measurements is which.
Left and right speakers with sub. Auto eq. Speaker crossover 85hz bw 24db/oct sub crossover 100hz bw 12db/oct. I tried using 12db instead of the 24db/oct for the sub and the dips were less.
How do I adjust phase in minidsp? My sub doesnt have phase controls or volume. It is just a diy amp with a diy sub. Thanks.