cheap mechanic
Member
- Joined
- Oct 31, 2020
- Messages
- 11
- Likes
- 1
High impedance mode is for driving high impedance headphones, such as a pair of 300 ohm headphones - anything 50 ohms to 600 ohms. This mode puts out two volts RMS. Auxiliary mode is for driving the inputs of audio equipment, such as headphones amplifiers, and puts out one volt RMS. These inputs usually have an impedance in the tens of kilohms.
so if i unplug my headphone 2.5 and enter the aux mode. would the 4 quad still be working? am i just lossing some loudness because now only 1 RMS?