- Thread Starter
- #61
Was going to download version 7 and saw it was up to 8. There is a problem with 8. It is leaving H2 and H3 at -300 db no matter what settings I use. Appears to only be distorting H4. Sounds that way too. At the settings shown it is nearly clean sounding.
I spent some time testing with smaller FFT sizes. v1.0.9 is available as the result.
It should behave better than v.8 with smaller FFTs. I still recommend keeping the FFT size at 64k, if possible, but the differences should not be nearly as big as they were previously:
FFT Size=64k:
And FFT Size=16k: