hyperplanar
Senior Member
Corrected up to 400 Hz.
Single point FR/phase measurement, mic pointed between the two speakers, both speakers playing:
MMM RTA measurement, mic also pointed between the two speakers, both speakers playing:
Step response:
There's no treble rolloff if I measure one speaker at the time with the mic directly pointed at it. Also, it's an uncalibrated ECM8000. I think it has a bit of LF rolloff since the setup doesn't sound like it's rolled off in the bass.
Using Neumann KH120As with a KH750 sub, which is doing the room correction and phase linearization duties, pretty well I have to say.
Single point FR/phase measurement, mic pointed between the two speakers, both speakers playing:
MMM RTA measurement, mic also pointed between the two speakers, both speakers playing:
Step response:
There's no treble rolloff if I measure one speaker at the time with the mic directly pointed at it. Also, it's an uncalibrated ECM8000. I think it has a bit of LF rolloff since the setup doesn't sound like it's rolled off in the bass.
Using Neumann KH120As with a KH750 sub, which is doing the room correction and phase linearization duties, pretty well I have to say.
Last edited: