CauliflowerEars
Active Member
- Joined
- Mar 6, 2023
- Messages
- 134
- Likes
- 21
Another member suggested getting this Rotary Switch to A/B test two amps with the same pair of speakers.
Unfortunately, I wasn’t able to get more clarification, and I’m not an engineer (sorry).
I don't want to fry anything, so would like to double check, how to connect everything
(Aiyima A07, Fosi V3, Topping E50 DAC, Elac DBR62 speakers):
1) With speakers, seems there are 2 options:
a. 4 cables (2 sets of 2 cables) coming out of the 1 set of speaker binding posts?
One set for amp 1, the other set for amp 2?
b. Do 1 speaker per 1 amp (I know it's not perfect, but at least something).
2) Is the following assumption correct?
Switch position 1:
Amp 1:
* Connect both cables of the Left speaker output to 5.
* Connect both cables of the Right speaker output to 1.
Speakers:
* Connect both Left speaker cables to 6.
* Connect both Right speaker cables to 2.
Switch position 2
Amp 2:
* Connect both cables of the Left speaker output to 7.
* Connect both cables of the Right speaker output to 3.
Speakers:
* Connect both Left speaker cables to 8.
* Connect both Right speaker cables to 4.
Unfortunately, I wasn’t able to get more clarification, and I’m not an engineer (sorry).
I don't want to fry anything, so would like to double check, how to connect everything
(Aiyima A07, Fosi V3, Topping E50 DAC, Elac DBR62 speakers):
1) With speakers, seems there are 2 options:
a. 4 cables (2 sets of 2 cables) coming out of the 1 set of speaker binding posts?
One set for amp 1, the other set for amp 2?
b. Do 1 speaker per 1 amp (I know it's not perfect, but at least something).
2) Is the following assumption correct?
Switch position 1:
Amp 1:
* Connect both cables of the Left speaker output to 5.
* Connect both cables of the Right speaker output to 1.
Speakers:
* Connect both Left speaker cables to 6.
* Connect both Right speaker cables to 2.
Switch position 2
Amp 2:
* Connect both cables of the Left speaker output to 7.
* Connect both cables of the Right speaker output to 3.
Speakers:
* Connect both Left speaker cables to 8.
* Connect both Right speaker cables to 4.