rode ai-1 Or the Audient ID4 MKii

[radhwen]

Hello guys i hope that you answer my question because now im really confused .
in my last research i did find the rode ai-1 and in the specs i found this output power :24 mW into 32 Ohms 245 mW into 300 Ohms . (the manifacture dont show the output power in the website i go this messearement in google )
and for the audient id4 mkii i found this output power by the manifacture specs :
MAXIMUM LEVEL @ 30R:2.59V Peak, 1.827V RMS, 223mW
MAXIMUM LEVEL @ 62R:4.18V Peak, 2.95V RMS, 280mW
MAXIMUM LEVEL @ 600R:7.72V Peak, 5.46V RMS, 100mW
and i found this photo that gets me crazy ahaha because now i dont know what messearment is right .
NOTICE( im talkin about the rode ai-1 and the Audient ID4 MKii ) for my headphone dt 770 pro 250 ohm ) please my freinds i might need your help thank you
and im searching for louder sound for music .

 

[staticV3]

Here is the Max voltage vs Load:

Below 140Ω, the Rode is louder and above, the Audient is.

However, both interfaces are way more than loud enough for your DT770 250Ω.

 

[radhwen]

Here is the Max voltage vs Load:
View attachment 279434

Below 140Ω, the Rode is louder and above, the Audient is.

Hoever, both interfaces are way more than loud enough for your DT770 250Ω.

so why they are saing in the spec that the roge output 24 mW into 32 Ohms 245 mW into 300 Ohms

 

[staticV3]

so why they are saing in the spec that the roge output 24 mW into 32 Ohms 245 mW into 300 Ohms

Who are "they"?
Rode themselves don't state any output numbers for the AI-1 that I could find.

 

[radhwen]

Who are "they"?
Rode themselves don't state any output numbers for the AI-1 that I could find.

yes you are right the specs that i fund its from Bn&H and not from the meanifacter but what about the audient id4 MKii i found this in their website
MAXIMUM LEVEL @ 30R:2.59V Peak, 1.827V RMS, 223mW
MAXIMUM LEVEL @ 62R:4.18V Peak, 2.95V RMS, 280mW
MAXIMUM LEVEL @ 600R:7.72V Peak, 5.46V RMS, 100mW
so how much mw she deliver in 250 ohm .. ?
and sorry im a noob in this things ahaha .

 

[staticV3]

At 250Ω, the ID4 MKII delivers 94mW per channel and the AI-1 delivers 73mW per channel.

Here is the spec sheet from Audient:

If you do the math, you'll notice that the mW numbers are combined L+R output. That's not usually how you spec output power.
Combining L+R like that is confusing and misleading.

 

[radhwen]

At 250Ω, the ID4 MKII delivers 94mW per channel and the AI-1 delivers 73mW per channel.

Here is the spec sheet from Audient:
View attachment 279440
If you do the math, you'll notice that the mW numbers are combined L+R output. That's not usually how you spec output power.
Combining L+R like that is confusing and misleading.

thank you then i'will go for the audient thank you my freinds you did helped me a lot

 

[Trell]

Who are "they"?
Rode themselves don't state any output numbers for the AI-1 that I could find.

Rode did so earlier but removed that later from specifications, and a bad sign. The AI-1 will distort heavily on main out beginning at around 70% of max volume, at least mine will and is no longer used.

Stay away from it and buy something else.

 

[radhwen]

Rode did so earlier but removed that later from specifications, and a bad sign. The AI-1 will distort heavily on main out beginning at around 70% of max volume, at least mine will and is no longer used.

Stay away from it and buy something else.

thank you brother i will go for the audient