AlexHRider
Member
- Joined
- Feb 21, 2021
- Messages
- 58
- Likes
- 72
And honestly: besides some more bands to the PEQ and perhaps a control app I couldn't imagine what to ask for
subwoofer out with low pass filter and high pass on mains output
And honestly: besides some more bands to the PEQ and perhaps a control app I couldn't imagine what to ask for
Dirac plus dual sub management on the RME ADI-2 FS would be awesome.
1. Some of his gain settings are showing in tenths of a dB- eg 1.6 dB- I can only adjust gain by half dB intervals (Im not that bothered about it being that accurate, but I guess I'm doing something wrong if he suggests 1.6 and I can only dial in 1.5 dB
2. He sets up a peak filter with a Q of 7, I can only go up to Q5- so again, I must be doing something wrong.
Any ideas hive mind?
Nope, the manual says that the gain is adjustable in 0.5 dB steps.but I guess I'm doing something wrong if he suggests 1.6 and I can only dial in 1.5 dB
Bands 4 and 5 are limited to Q 5, but for bands 1 to 3 the limit is Q 9.9. Just swap the bands.He sets up a peak filter with a Q of 7, I can only go up to Q5- so again, I must be doing something wrong.
Excellent, thanks.Nope, the manual says that the gain is adjustable in 0.5 dB steps.
Bands 4 and 5 are limited to Q 5, but for bands 1 to 3 the limit is Q 9.9. Just swap the bands.
@danadam response is v helpful now I know I can use middle bands for high Q peaks.Mine has never allowed those either.
I think it's just a mistake in him not knowing or correctly remembering the ADI-2 DAC's limitations. He's probably creating the filter settings with whatever software EQ he uses to make the rest of his profiles and not on the actual hardware.
Bands 4 and 5 are limited to Q 5, but for bands 1 to 3 the limit is Q 9.9. Just swap the bands.
@danadam response is v helpful now I know I can use middle bands for high Q peaks.
Actually, more errors. I got around to the 6th and 7th filters, the bass and treble shelves, he's set a treble shelf at 2k and settings only go as low as 3k. I'm thinking I'll stick to EAPO on the pc. All the button pressing and menus has given me a headacheBizarrely...that is correct. I guess you do have to use the bands "out of order".
But with 0 dB gain it should not make much differencehe's set a treble shelf at 2k and settings only go as low as 3k.
Well that's what I thought tooBut with 0 dB gain it should not make much difference
That's why I repeat: this device would be perfect if controllable by an app. And, of course, some additional bands for the EQ would be of help from time to time....Actually, more errors. I got around to the 6th and 7th filters, the bass and treble shelves, he's set a treble shelf at 2k and settings only go as low as 3k. I'm thinking I'll stick to EAPO on the pc. All the button pressing and menus has given me a headache
Yup- agree totally. Even if you could do it through a USB connection with windows and then unplug and leave it as you set, a decent interface is crucial for fairly lengthy set ups like a 7 band EQ, renaming and saving profiles.That's why I repeat: this device would be perfect if controllable by an app. And, of course, some additional bands for the EQ would be of help from time to time....
Or a headphone that doesn't need more than the bands provided (Akg K371 )
IMHO it's worth the waitI ordered one, but could be need to wait for 3-4 weeks ......
IMHO it's worth the wait
By the way ... could be it is off topic..... what is DIGIcheck, and how to work with ADI-2 Dac?