MbphotoX

Question (maybe a silly one): Do you have the speakers connected with to pairs of cables from the correct terminals on the back? (I'm...

Are you using a stereo setup and listening in auto surround mode?! (Auto Surround is intended to "stretch" a stereo signal across your...

I have "Onkyo TX-SR3100 AVR 5.1" and I did exhaustive measurements mostly without load trying to figure out the behavior of the Pioneer/...

as far as we can tell, the "limp mode" as found by Amir, has NEVER been activated, ever.. We had one single member do power...

yeah, you really want all output to be Bitstream, and let the AVR handle all processing. an accidental push of a button can send the...

Even at 35 Watts, those speakers with 90dB sensitivity would produce WELL over 100dB SPL. (You can drive them with a tube amp putting...

If you like it, all is good. I doubt, however, that an upgraded power supply improves the sound of your turntable. You could measure...

Why did you return it so quickly?! It was still under warranty and any issue could've been fixed even after the return window has...

my previous Pioneer (which I only gave up because it couldn't do passthrough HDR video) was the SC-LX57 with a class D amp. Pretty...

I'm not a big fan of spades because they have a habit of working themselves loose. I recommend getting some banana plugs, removing the...

Your Anthem has MUCH less power than the Pioneer. (it's rated at 100W per channel at 8 ohms, feeding 2 speakers!) Even when feeding 7...

Funny how people on the Internet always choose to filter out all the important things and distill everything down to the stuff that...

your amplifier shouldn't "sound" at all, mate.. it's all in the source material, the speakers, and the room. Unless the amplifier is...

I still don't understand the problem, to be honest.. When I listen to music, SACD, Tidal, Vinyl Records, etc. then I have the volume at...

Here's my suggestion: 1. Factory reset the receiver 2. Run MCACC or Dirac Live (no need to run a dozen measurement positions, 3 is...