Hi All,
I'm new here and just technical enough to find a few things on my own or follow instructions.
I have a Focusrite Scarlett Solo 3rd Gen and a Fifine K668 Dynamic Cardioid microphone (XLR connected).
I've connected a pair of Edifier G2000 speakers that are parallel, the left and right speaker are hard wired together.
The back of the right speaker has 3.35 mm AUX IN and SUB OUT ports. Upon recommendation from Focusrite, I connected a 3.5mm 1/8" TRS (balanced) to Dual 6.35mm 1/4* TS Mono (unbalanced) Breakout Cable Y Splitter Stereo Cord Adapter. The 3.35 mm is plugged into the AUX IN on the back of the right speaker and the dual 1/4" are into the back of the Scarlett.
Does anyone have advice on how to get rid of static from speakers? It was clear at one point, but now I can't get rid of it. Microphone seems to work and is fairly clear. For the speakers, I think that something in sample rate, buffer rate settings might be off, or, maybe the dual 1/4" to the back of the Scarlett need to be balanced connections? Any ideas or advice is appreciated.
I'm also connected to DAW.
I'm new here and just technical enough to find a few things on my own or follow instructions.
I have a Focusrite Scarlett Solo 3rd Gen and a Fifine K668 Dynamic Cardioid microphone (XLR connected).
I've connected a pair of Edifier G2000 speakers that are parallel, the left and right speaker are hard wired together.
The back of the right speaker has 3.35 mm AUX IN and SUB OUT ports. Upon recommendation from Focusrite, I connected a 3.5mm 1/8" TRS (balanced) to Dual 6.35mm 1/4* TS Mono (unbalanced) Breakout Cable Y Splitter Stereo Cord Adapter. The 3.35 mm is plugged into the AUX IN on the back of the right speaker and the dual 1/4" are into the back of the Scarlett.
Does anyone have advice on how to get rid of static from speakers? It was clear at one point, but now I can't get rid of it. Microphone seems to work and is fairly clear. For the speakers, I think that something in sample rate, buffer rate settings might be off, or, maybe the dual 1/4" to the back of the Scarlett need to be balanced connections? Any ideas or advice is appreciated.
I'm also connected to DAW.