I thought I would share yet another DIY project that is going to start hopefully next week. I will keep on refreshing this post as we progress further.
It will be a 5.0 system for my neighbor. He already has a sub but that will also be replaced with a DIY Dayton Audio Reference based model (that will be the next project once this one is finished...)
All five speakers will sport a Markaudio CHN110 driver in a sealed box using 21mm plywood with Qtc=0.707 as per the below
The finished speakers will be driven by an entry level Onkyo home theater receiver (HT-R495) using AccuEQ room correction
Measurements will be posted pre and post correction as well
The drivers shall arrive later this week and building the cabinets shall start next week
More to follow
It will be a 5.0 system for my neighbor. He already has a sub but that will also be replaced with a DIY Dayton Audio Reference based model (that will be the next project once this one is finished...)
All five speakers will sport a Markaudio CHN110 driver in a sealed box using 21mm plywood with Qtc=0.707 as per the below
The finished speakers will be driven by an entry level Onkyo home theater receiver (HT-R495) using AccuEQ room correction
Measurements will be posted pre and post correction as well
The drivers shall arrive later this week and building the cabinets shall start next week
More to follow