• WANTED: Happy members who like to discuss audio and other topics related to our interest. Desire to learn and share knowledge of science required. There are many reviews of audio hardware and expert members to help answer your questions. Click here to have your audio equipment measured for free!

Dirac + DLBC with LR active bass section.

geek101

Active Member
Forum Donor
Joined
Aug 5, 2019
Messages
133
Likes
41
Location
California, USA
I got the multichannel with Bass Control.

All in all I have a 3.1 channel system with my LR speakers having active bass section.

Signal chain HTPC (Dirac + Win11) -> topping dm7(usb) -> amps

How do I split the L to L + LSub etc ? Like an external crossover in Dirac ?.

I am starting with selecting an LCR configuration and adding 3 subs but I feel like converting all subs to mono incorrect technically.
 
OP
geek101

geek101

Active Member
Forum Donor
Joined
Aug 5, 2019
Messages
133
Likes
41
Location
California, USA

theREALdotnet

Major Contributor
Joined
Mar 11, 2022
Messages
1,181
Likes
2,036
I believe that when you use DLBC, Dirac is the crossover (between the bass and the rest). You need to find a way of getting to the bass amp of the speaker directly. Does it have a separate input?
 

dziemian

Member
Joined
Jun 11, 2020
Messages
41
Likes
36
In DLBC you control each channel including bass ones separately. Dirac sets xovers itself based on measurements. In 3.3 setup (LCR +3 subs) you need an interface with 6 channels.
 
Top Bottom