rew eq

  1. M

    REW+EQ APO+Topping LA90+DIY Markaudio Pluvia 11

    Hi everyone, I am in total disbelief. Just registered to find some advice or comment of someone with more experience than me. Listening for years now with good and bad gear. Today I finished my project with the Markaudio Pluvia 11, Topping La90 and REW+EQ APO for room correction. The position...
  2. A

    REW measurements with hearing loss

    Hello A UMIK will be arriving soon and I'll be taking my first REW measurements and would be grateful for some advice please... I have speakers on my desk in a near field configuration. I have some hearing loss in one ear and so I deliberately move one speaker (on the good side) further away...
  3. S

    I have a plan... or so ;)

    Hi Folks, I like to hear some opinions on my plan. I recently thrown away my NAD C658. A Topping D70 Pro Octo took its place. Now I need Dirac Live or REW back ;) So, to avoid up/downsampling of audio in the miniDSP Flex or somehow, I like to complicate things... ;) N130 -> USB-Out -> Topping...
  4. IAtaman

    Question : Is this Room EQ good enough?

    Hello! We have a PC connected to the TV in the living room which we use for streaming and music listening. Using a combination of measurement mic, REW and EQ APO I was able to bring the room FR to the following level. What I don't know is whether this is good enough or not or should I continue...
  5. M

    New Home Theater REW Readings - Let me know how I did. (newbie designed and built)

    Hello Guy's, I just recently finished my "DIY" Theater Room and overall I am very happy with the result... :)... Admittedly I am very new to all this but doing research, planning, and implementation is what I love to do... Here is my setup...I am looking for ideas to further improve this room...
  6. D

    REW phase interpretation and understanding

    Hi clever nerds :) In a continuos search for better sound, I wonder how to interpret the phase diagram in REW. Can you tell me how a correct phase should look like? This is a recording from my room from en experiment. I used the in-line RCA crossover (built in) fixed 80 Hz 12dB/oct. in my...
  7. P

    EQ room correction, needfor chest thumping bass

    Hello all, I just got set up with a MiniDSP Flex (No DIRAC). I wanted to play with the EQ for my 2.1 system. I played around with REW, averaging from different seated positions, and seeing how EQ changes did or did not affect how the speakers responded in the room. After playing around some...
  8. Marc v E

    B&O Beolab 9 measurements

    Hi all, Long overdue but finally done! I managed to measure my speakers with Rew. I measured using a umik1 microphone, in room, with the umik at my listening position. I don't use subwoofers or any eq. The first picture is the response with 1/24 smoothing applied; the second the raw result...
  9. Mehdiem

    REW and RME: How to Generate EQ tailored for RME ADI-2 using REW?

    I have performed my first measurement with UMIK-1 and REW. I need your help to understand how to generate & translate my EQ measurements into RME parameters. I could not find a way to generate EQ according to RME parameters and capabilities. I tried using Generic EQ with 7 filters but didn't...
  10. S

    Moving Mic and REW EQ before and after...

    For the laugh I decided to try this out...here are the results...note my graphs are 0.5db steps and psy smoothing...mic is an m30 ...normally I only do EQ up to the ceiling mode (about 135 in my room), but for the laugh I decided to go up to 2kHz...I put a bit of bass back in after, REW auto EQ...
Back
Top Bottom