Benchmark DAC2 and DAC3 has them. I guess you forgot ;-)I have not seen triggers on any desktop DACs.
Benchmark DAC2 and DAC3 has them. I guess you forgot ;-)I have not seen triggers on any desktop DACs.
Likely never getting their pricier stuff if there's no local distributor.
Topping has one here and is actually cheaper than international distributor. SMSL also has one (also cheaper if you factor import tax) but no Loxjie for some reason.If you wish for a local distributor just add >50% to the cost.
With the conversion of our economy to lockdown status, local providers going out of business, to an economy via on-line sales, this is an opportunity for manufacturers and virtual 'retailers' to step up in the customer service department.That's one optimistic quote for sure. Can't even get them to reply me about shipping problem...
Benchmark has a smallish form factor, but I personally wouldn't call those a 'desktop' item. But what's in a name?Benchmark DAC2 and DAC3 has them. I guess you forgot ;-)
About $140 pointsThis however is exactly the same as the SMSL M400: That begs the question: What's the point?
Benchmark DAC2 and DAC3 has them. I guess you forgot ;-)
Dashboard is done at 20hZ-20kHz. THD+N is done at a much wider 90kHz bandwidth, what this means it that this measurement also tests the DAC for suppression of artefacts in the ultrasonic band. So any issues there will show up.How do I need to read these measurements? Can somebody clarify it for me?
First picture shows THD+N for 1KHz XLR output lower then 0.0001 %
When I look at the picture THD+N vs Frequency @ 48KHz the measurements is between 0.001% and 0.0005%.
No where near the 0.0001 %.
Not very clear to me. I was expecting that in the 20hz-20kHz measurement I would see for 1Khz the same result as in the first measurement.Dashboard is done at 20hZ-20kHz. THD+N is done at a much wider 90kHz bandwidth, what this means it that this measurement also tests the DAC for suppression of artefacts in the ultrasonic band. So any issues there will show up.
Are ultrasonics truly an audible issue, that's debatable, but especially for speakers it makes sense not to have any crap in there. @WolfX-700 does the THD+N vs Frequency test in both 20kHz and 90kHz bandwidth, which makes it even more apparent if it has ultrasonic issues or not.
It says 90kHz BW though.. In any case, check out WolfX's M400 measurement, 20kHz BW (solid line) aligns to around ~0.0009% THD as in the first measurement dashboard. I take this one because the SMSL M400 and loxjie D50 are very similar devices. Dotted line shape is near identical to the red line in the image you linked above.Not very clear to me. I was expecting that in the 20hz-20kHz measurement I would see for 1Khz the same result as in the first measurement.
Thanks for the effort to tryto explain things. I guess Im reading the graphs incorrect.It says 90kHz BW though.. In any case, check out WolfX's M400 measurement, 20kHz BW (solid line) aligns to around ~0.0009% THD as in the first measurement dashboard. I take this one because the SMSL M400 and loxjie D50 are very similar devices. Dotted line shape is near identical to the red line in the image you linked above.
Why is output of dac important? The amp inputs are relatively pretty high; so it seems like no problem at all.94/320 Ohm RCA/XLR, claimed. So it is not the same as the M400?
Why is output of dac important? The amp inputs are relatively pretty high; so it seems like no problem at all.
With Loxjie being the sister company of SMSL I like the thing they do with their lower end products wehre they give them distinctive looks despite technical similarities.
This however is exactly the same as the SMSL M400:
View attachment 107345View attachment 107346
That begs the question: What's the point?
Hi, I'm interested in the Loxjie d50. How does it fair against the topping d90. I can get the loxjie for 570 euros. Looking forward to hear from you. Kr, AlexI have the loxjie and topping d90 - let me know if you guys want a comparison.
Hi, I'm interested in the Loxjie d50. How does it fair against the topping d90. I can get the loxjie for 570 euros. Looking forward to hear from you. Kr, Alex