- Joined
- Feb 27, 2018
- Messages
- 977
- Likes
- 1,078
Curious if anyone has faced this same issue and has any advice...
I have a basement room that's unfortunately exactly 7 feet high and exactly 21 feet deep, with a post nearly in the middle that puts the only reasonable listening position dead center. Those dimensions create a very strong mode at 80-81 Hz at the listening position.
Before I implement Dirac with a minidsp DDRC-24, does having a strong mode at 80 Hz suggest that I would get a better end result by crossing over at either about 70 or 90 Hz? My mains will run flat to just about 60 Hz.
I have a basement room that's unfortunately exactly 7 feet high and exactly 21 feet deep, with a post nearly in the middle that puts the only reasonable listening position dead center. Those dimensions create a very strong mode at 80-81 Hz at the listening position.
Before I implement Dirac with a minidsp DDRC-24, does having a strong mode at 80 Hz suggest that I would get a better end result by crossing over at either about 70 or 90 Hz? My mains will run flat to just about 60 Hz.
Last edited: