renaudrenaud
Major Contributor
This is a 3D printed pair of speakers. The design is from Akemake in 2014 (more info here). Akemake is no more here but a company, called deeptime is managing the commercial product.
In our case with use speakers are from Aliexpress. I like very much them, I use often these speakers in my DIY things, like how they sound / price (around 50€/pair). Codename is DQ40TZF. Really better than Tang Bang for the same price, in my opinion.
So we printed half one, in 23 hours, and repeated 3 times.
Time to glue...
Few years ago I installed a Raspberry Pi + X400 amp board in an Ikea Frame. Let's paste the amp and the speaker.
Few bars from Kari Bremnes.
In our case with use speakers are from Aliexpress. I like very much them, I use often these speakers in my DIY things, like how they sound / price (around 50€/pair). Codename is DQ40TZF. Really better than Tang Bang for the same price, in my opinion.
So we printed half one, in 23 hours, and repeated 3 times.
Time to glue...
Few years ago I installed a Raspberry Pi + X400 amp board in an Ikea Frame. Let's paste the amp and the speaker.
Few bars from Kari Bremnes.