• WANTED: Happy members who like to discuss audio and other topics related to our interest. Desire to learn and share knowledge of science required as is 20 years of participation in forums (not all true). Come here to have fun, be ready to be teased and not take online life too seriously. We now measure and review equipment for free! Click here for details.

Quick start guide for spinorama presentations in VituixCAD using Amir's shared spindata

BYRTT

Addicted to Fun and Learning
Forum Donor
Joined
Nov 2, 2018
Messages
558
Likes
1,304
Location
Denmark (Jutland)
#1
Get free VituaixCAD software and pdf-file guides at this link https://kimmosaunisto.net/ and suggest if it makes one happy in the long run then down the road one can make a whatever donation to creator via dialog in "Help" meny.

For animated quick start guide below one can download the VituixCAD prepared spindata zip-folder attached below for Genelec 8341A named "Steps_x72_(Genelec_8341A).zip", and for other released or future speaker reviews use the attached zip-folder named "ASR_txt_files_convert_to_VituixCAD.zip" to convert Amir's few txt-file data to multiple txt-files that VituixCAD can understand, for converter there is a how to guide in that zip-folder and in converter is a MS Excell 2010 spreadsheet with macro automation one needs have access to a computer with a licensed MS Excell program.


1_2500mS_mixed_5000mS.gif



VituixCAD can do tons of speaker related neat stuff/manipulation and maybe if requested i can add more guides, but above guide should get one going reading Amir's spindata and if one right click or double click in the two graphs "Power & DI"/"Directivity" it should speak for itself how to get possibilityes change graph presentations or capture them.
 

Attachments

Last edited:

aarons915

Active Member
Forum Donor
Joined
Oct 20, 2019
Messages
276
Likes
413
Location
Cincinnati, OH
#2
I'm having trouble getting this to work, has anyone had the error "Run time error 9 subscript out of range"? I did change the last column to the correct value and made sure I have a USB that is labelled D: with the folder put in the drive just as the help drive shows. The macro looks like it finished just the first on axis measurement and creates a sheet 2 with the 1 measurement but then it gets hung up, nothing is in the step x 72 folder either. Any help would be appreciated, this would be a really useful tool.
 
OP
BYRTT

BYRTT

Addicted to Fun and Learning
Forum Donor
Joined
Nov 2, 2018
Messages
558
Likes
1,304
Location
Denmark (Jutland)
Thread Starter #3
Hi @aarons915, only error myself had is the last point about line seventeen in macro settings explained in "How_to_guide.png" for Excell macro, so in general after the inset of data always schroll down the spreadsheet to check that last row/line number is consistent to setting in macro and if its not then edit line seventeen in macro before one run the macro.

Mine operating system and Excell 2010 is Danish language pakages and member @napilopez is in US language and gave me below feedback in a PM about get the spreadsheet up running:
I had to change a few things in the macro to make it work ('ark' to 'sheet' for example because I'm not in denmark) :p but it's been a huge time saver!

So my forward suggestion will be try open the empty horizontal plus vertical spread sheet and edit macro line seventeen to 197 as guided in that png-file guide and go to Excell settings and set "ark" to "sheet" and now save them both spreadsheets, then try a run on the latest review for Revel M106 that i know is printed from Amir using 197 rows/lines, else should it not work try PM napilopez and see if he would share his actual spreasheet :)...
 
Last edited:

aarons915

Active Member
Forum Donor
Joined
Oct 20, 2019
Messages
276
Likes
413
Location
Cincinnati, OH
#4
So my forward suggestion will be try open the empty horizontal plus vertical spread sheet and edit macro line seventeen to 197 as guided in that png-file guide and go to Excell settings and set "ark" to "sheet" and now save them both spreadsheets, then try a run on the latest review for Revel M106 that i know is printed from Amir using 197 rows/lines, else should it not work try PM napilopez and see if he would share his actual spreasheet :)...
I think that is the problem, when I ran the debug it went to the line that said Ark, I'll change it to sheet, thank you.
 
Top Bottom