umik-1

I’m sharing real-world in-room REW measurements of the Neat Momentum SX3i standmount speakers, powered by the Vincent SV-237MK hybrid integrated amplifier. Measurements were taken from the listening position at 3 meters, using a calibrated UMIK-1 microphone, no EQ, no room correction, untreated...

Hello everybody! Currenlty having an UMIK-1 but I'm willing to switch to Focusrite Scarlett Solo 3Gen + Behringer ECM PRO analogue mic, just to have more precision in impulse response - time / phase alignment in REW in my car and home measurements. Is this a good idea? Will I sacrifice...

I've added a SVS SB-2000 to my setup (2x Swissonic A306 + SB-1000) and I'm wondering how to properly measure the Infrasonic response of my system. The calibration file of my UMIK-I goes down to "only" 10Hz and the measured response via a RTA average looks like this before any EQ is applied...

I have a spare TacT Mic. I was wondering if what device I need to connect to the computer to run a REW software scan. I am just weighing if I need to buy a UMIK-1 or this converter for REW software. Thank you.

Hi All, I have a question about downsides of using CSL UMIK-1 vs UMIK-2 vs Earthworks M23R for Home Theatre setup calibration using DIRAC / DART or just manual EQ with REW. I believe that CSL UMIK-1 tracks pretty much the same as Earth M23R, but I also read that due to fact that UMIK-1 has no...

I am using REW + UMIK-1 for room EQ of my office setup, which is based on RME ADI-2 DAC fs + Neumann KH 80 DSP. The 1st 2 bottom lines were done using MMM: pink noise on generator, RTA with 32 samples. The 3rd and higher line is a single measurement holding the mic roughly where my head...

All, I have finally gotten around to using my new C97 II speakers, the UMIK-1, REW, and Equalizer APO. For the relatively cheap gear I have, this is the best sound I have been able to achieve in my house and the Jamo C97 II solved my lacking musical punch problem. I did find what I think might...

I've moved into a new place and will set up a home cinema room. I want to make sure we don't disturb the neighbors and they are willing to let me do some measurements. Before I do this, I want to make sure I'm measuring the correct thing. My current plan is to generate pink noise at sufficient...

Dear All, I've bought a MiniDSP nanodigi, 2 8" subwoofers and a UMIK-1 and I've been experimenting with them for 20+ hours now. For my latest configuration, I have done the following: 1. REW sweep measurements in bass region for each of the 4 drivers for 3 LPs, I used acoustic reference on the...

Condition: NEW / UNUSED Price: $89 w/ shipping Price is FIRM. Low offers will be ignored. PAYPAL ONLY Also listed on my ebay: https://www.ebay.com/itm/115467635163

Looking to sell my DDRC-24 and UMIK-1. Works great. Dirac live license and remote included. All firmware up to date. Looking for $400 obo shipped CONUS

Recently I have bought 4 pieces of Hofa Natural basstraps from Germany and I decided to post my measurements here in ASR so everybody could see what these things can do in a living room in a real-life situation. I got two of the 1 meter models and two of the 0.5 meter models - both are the...