NTTY

I published the results of my standard 20-20k sweep @-12dBFS (16bits/44.1kHz), and it shows same results as if I'd run it in digital...

This is a "review" of a simplest possible AB(x) box comparator that I built in the year 2001 and is still in operation. This...

Time to bring back this Dunning-Kruger effect graph

It depends on what you are testing. If it is hardware and you don't need level matching, then any AB switch will do (as long as it...

What is the test for that?

No, you have to select the rear of front outputs from the menu, if I remember well.

No I don’t have the non-pro version. Probably yes. You’ll need to slave the Focusrite to incoming SPDIF, if that is an option (else...

I also put the unit in its ABX mode. Boy, it does a lot less than I thought. You run the test. But then it is your responsibility to...

FYI I started to do some listening tests. The chain is highly susceptible to ground loops/noise. So much so that with my IEMs at...

The box is not with me but Amir ;)

The CDP-35 uses a very old, one of the first BurrBrown, the PCM54, an R2R converter. Expect more distortion, reduced dynamic range as...

Back to square one: why? But no need to reply. Simpler option: I suggest you buy back the device from Amir and run that test.

What do you mean by ABX procedure? Amir reported he and his wife can differentiate the sound. What more can he report you’ll trust? I...

Isn’t it what @amirm reported?

Wake up, they already are...