nick-v

This is my setup for a year now. Wich Bacch Audiophile with ORC DSP. A NAD M33, Analysis Audio Omega dipole speakers and big custom...

+1 But the price tags are ridiculous. I would prefer buying the Dutch&Dutch 8c every time over the stand mount speaker and having money...

I prefer the black option,

The state of the DSP market If you wish to implement DSP, you will need (1) software to design filters, and (2) a way to use these...

Minimum Phase vs Linear Phase Both IIR and FIR are capable of creating minimum-phase filters, however (for reasons I won't go into)...

I thought I would make a public service post about DSP, because I have noticed that many people don't seem to understand it. I hope this...

The ultimate setup :)

This is a review and detailed measurements of the A7 / "A7 Mono" stereo power amplifier with balanced inputs. It was sent to me by the...

@Sieniek the cones are black. Mine have some dust on them :-) and depends on the lighting:

This is an analysis of Raspberry Pi4 USB signal quality to drive a budget but good DAC without impact on its performance. Traditionally...

This is a review and detailed measurements of the Michael Fidler Spartan 20 Moving Coil and Magnet phono preamp. It was sent to me by...

This is a review and detailed measurements of the NAD C 3050 integrated amplifier with included DAC and optional streaming module. It is...

Hello, I also have DIY Speakers that use KEF coaxials that you might find interesting, in my case the ones from the LS50. They were not...

Hi there. i have build a speaker like a blade or more like a big ls60. Kef uniq from r-series with 4x8inch woofers each. Hypex Plate...

This is a study of measured differences if one swaps up the TI NE5532p dual IC op-amp in a Fosi V3 Mono amplifier with a "discrete"...