Matias's latest activity

Customers should just buy 2 NC502MP amps and use only 1 channel of each = mono amp. :)

Just got my pair. I thought my LYD 7s were great... and they are! But the KH 310s are clearly in an entirely different class. Absolutely...

The design may be 10 years old but look at the performance. It is still competitive in the current marketplace. It's a speaker, not an...

While we're at at it, I think it's worth remembering/highlighting that old B&W speakers, even those that also had floating tweeter...

Detailed measurements of the 800D3 are available (all images are from there). The D4 should not behave much differently in comparison...

Looking at that, I'd say the overall impression is that 100Hz-1kHz is low. Normally an overall downward slope is preferred, so leaving...

Ive had the d50s, d30pro, d70s and the d90se is by far the best dac I've heard. The d30pro comes in second. Imo

Alternatively one can use fixed analog filters in order to avoid the ADC-DSP-DAC of the subwoofer limiting the performance...

$3999 HP + $219 dac-amp... [sorry couldn't resist :p]

This is a review and detailed measurements of the FX Audio DAC-M1 DAC, headphone amplifier and Bluetooth receiver. It was sent to me by...

The Marantz spec is just [email protected] The PSU should be fine for that. Still, for that kind of money.. why skimp on the PSU.. Hypex has a...

Yes, that is the point. Marantz used a severely undersized power supply and choke the modules, and they specified the output power...

Yes. And the problem is that the NC500 module draws up to 700W in 4 ohms each, that is 1.400W for the pair, and the Model 30 power...

Mains related hum and noise in power amplifiers We have had some discussion in another thread...