hex168

Bookshelf speaker that cost 500$ a pair, with a total of four drivers, will have drivers that cost 10-20$ per driver. Do you honestly...

Not at all, speakers require proper engineering if they are going to be any good, and that's not cheap. A $13K retail price speaker is...

A few points on this, the last one is the most important... 1. We are manufacturers ourselves in Germany and in the last 5 years our...

Hardware is either a Q-Sys Core 110f, or 510i, defending on how much FIR processing I'm using. With Q-Sys, you design the processing...

Interesting setup. If I may ask, what is the hardware and how did you configure your remote to switch from LCR matrixing to stereo?

Yes. Here's a link from a fellow audio enthusiast that helped me implement Gerzon's matrices for turning stereo into 3 channel L-C-R...

Three suggestions that could help with your "problem." Trying the last one is free. 1)...

Sorry I did not see this post at the time. Maybe within half a meter; whatever distance is needed to achieve a low-distortion output at...

Start with speakers, room treatment, and room correction. On a tight budget, room correction will have the biggest impact. DACs and...

As Curvature noted in his post, REW, for example, allows you to set the gating window. This means that you can measure in room and get...

No, you are missing the point. I'll explain a little. This is not a semantic issue. When you "measure" a room using something like REW...

Tell us more about what you are trying to do and we can help more. Did you build two cabinets? If not, what are you trying to achieve...

The fundamental of low-B (31 Hz) on a bass guitar is normally quite low in level compared to the overtones. I am only aware of ONE bass...

I find this post distasteful. Why don’t you put Purite Audio on ignore so you don’t have to be offended?

I wish you could have your amps and speakers. Have multi-channel DACs, and have it all fed by one digital stream. For Dolby Atmos...