jst
Active Member
- Joined
- Aug 8, 2021
- Messages
- 134
- Likes
- 39
My amp is Cambridge Audio Azur 640A, it has A (left+right) and B (left+right) speakers and the spec related to my question is :
- Power output: 65 watts per channel into 8Ω (stereo)
- Speaker load impedance: 4Ω to 8Ω
My speaker is Wharfedale Diamond 9.2 with 6 ohm/100 watt. It can be bi-wired.
If I use bi wire with B speakers for HF (High Frequency) and A speakers for LF (Low Frequency), my questions are :
1. what is the impedance being used, 4 or 8 ?
2. how many watts are coming out to each of the speakers ?
3. should I bi-wire or should I use just A speakers output and put back the jumpers on the speakers and NOT bi-wire it ?
Thx.
- Power output: 65 watts per channel into 8Ω (stereo)
- Speaker load impedance: 4Ω to 8Ω
My speaker is Wharfedale Diamond 9.2 with 6 ohm/100 watt. It can be bi-wired.
If I use bi wire with B speakers for HF (High Frequency) and A speakers for LF (Low Frequency), my questions are :
1. what is the impedance being used, 4 or 8 ?
2. how many watts are coming out to each of the speakers ?
3. should I bi-wire or should I use just A speakers output and put back the jumpers on the speakers and NOT bi-wire it ?
Thx.
Last edited: