ArthurPug
Member
- Joined
- May 20, 2023
- Messages
- 9
- Likes
- 1
Hello, new to ASR. I've tried updating an early version R26 according to the included read me included in the download section at https://www.mediafire.com/file/kiv6myi56fatzi4/R26_Gustarender_1v4_upgrade.zip/file after the files are unzipped:
1) Switched off at back, removed the USB B cable
2) Ran usbimager, selected the R26_Release_1v42.img.gz file, attached a USB C lead to my laptop with the firmware on
3) Selected the D: [29.1 Gib] Generic STORAGE DEVICE as destination (the only option that appeared). Then hit the write button and waited four mins for the file to transfer which appeared successful.
4) Disconnected the lead and powered back on, using the rear switch first then the front button ... and nothing seems to have changed.
I can't find where to check what firmware it's running but menu text is no larger & no option to stop the standby button flashing. I've redownloaded the firmware to make sure the file was not corrupted and have tried 2 different USB C cables that I know are no faulty to repeat the process. Thanks in advance for anyone who can point me to where I'm going wrong.
1) Switched off at back, removed the USB B cable
2) Ran usbimager, selected the R26_Release_1v42.img.gz file, attached a USB C lead to my laptop with the firmware on
3) Selected the D: [29.1 Gib] Generic STORAGE DEVICE as destination (the only option that appeared). Then hit the write button and waited four mins for the file to transfer which appeared successful.
4) Disconnected the lead and powered back on, using the rear switch first then the front button ... and nothing seems to have changed.
I can't find where to check what firmware it's running but menu text is no larger & no option to stop the standby button flashing. I've redownloaded the firmware to make sure the file was not corrupted and have tried 2 different USB C cables that I know are no faulty to repeat the process. Thanks in advance for anyone who can point me to where I'm going wrong.