NoDad

Here's a screen shot of the three measurements, with Var smoothing. The DSP was applied from 30 - 700 Hz. Is that too much? Should I...

Thanks. Glad you added the last paragraph :) as I have spent today redoing the measurements and used the VAR smoothing for the EQ. I...

You're correct, the PEQ is the whole system with DSP. You're also correct that it's too much bass. For some reason the autoeq didn't...

Yes, I uploaded the file. Not from the original measurements, but the latest. Which was made where the speakers are placed now.

Thanks. Unfortunately I cannot put anything on the ceiling either, as it's a cloth stretched across and only connected on the sides of...

Thanks for the tip. I had looked at it before, but apparently not reading it properly. I plan to finish it tonight.

Sorry about the disappearance. I caught the flu and have been down for the count. Anyway, I have done some more speaker moving and...

Bjorn, what kind of treatments are we talking about? Similar to what I initially planned? I mean, front wall absorbers?

Just listened and no affect on the stage, but I'll listen some more. The speakers are delivered with foam plugs to be used close to the...

Thank you all for your replies. The speakers were 57 cm from the front wall and 78 from the side walls. I just tried moving the...

ppataki, thanks for your reply. Aren't the nulls a little high to be covered by additional subs? How high can the crossover be set...

I need some help. Below is a REW measurement and as you can see below there’s a big dip 90 – 180 Hz and another around 300 – 450 Hz...