levimax

"Mix USB Channels" is a new feature which I wasn't aware of but it does the trick, thank you very much!

Personally, I'd do it in DSP software, but you can also do it in CueMix. Under Device, set Mix USB Channels to Additional. Then go...

I am inexperienced with mixing interfaces/ Cuemix5 but thought I could figure this out but I can't. I have a Windows PC hooked up to...

No I have never seen that documented, if true then no need for a Klipple or anechoic chambers. This is also news to Dr. Toole apparently...

As has been mentioned humans with 2 ears and a head and a brain do not perceive sound the same as a microphone. Humans have the ability...

Amir's Klippel machine is able to accurately identify FR issues of the speaker separate from the room. If you have accurate spinorama...

Or get better speakers. The problem is above Schroeder you don't know what you are measuring so in essence "driving blind". To me it...

DSP can do some things quite well, mostly cleaning up bass below Schroeder. It can not make "poorly-performing speakers" sound like...

Do I really have to be a scientist or a working audio engineer, isn't it enough to understand what Toole says about the matter? I have...

Human brains can hear through the room by filtering out reflections, that is the hard part of DSP, what the MIC "hears" and what we...

Measured how? That's the big misunderstanding and the biggest barrier. Takes a lot and expensive gear to do it right plus methods and...

After several years of messing around with sub integration with near full range speakers it has become apparent to me that subs don't...

If you follow Dr. Toole on these threads you will see that he is frustrated that his work, specifically the "Harmon Curve", is being...

The Earthworks M23 I am using (With a Motu Ultralite MK5 interface) is much higher performance than either the UMIK-1 or UMIK-2 so I...

I tried the DLBC about 9 months ago with a UMIK-1 and some DIY tri-amp speakers and I got both "?" issue and crazy timing issues. I...