Buckster

thankyou I did think an alternative "solution" (pretty rubbish one but might work) would be to attach the 2 sets of speaker cables...

Good point and you are 100% correct in your thinking. Expect anything to be the culprit and keep in mind that the speaker terminals flex...

thanks very much Doodski and kyuu for the equivalent photo and the schematics It is odd that the 2 terminals affected are next or near...

Here is the PCB that you are flexing and where the apparent issue is located. The odds are that the solder at a speaker connector(s) is...

Sounds like you've eliminated the speaker wire connection as the culprit then. Hrm... I can't find a good source for pictures of the...

I did think I could work around for at least one pair (only one of pair affected) by using the custom amplifier setting to use "Height 1...

thankyou for the reply - the first one I noticed being problematic was connected via banana plugs, I replaced the banana plugs and no...

2 questions please: 1st off - I seem to have an issue with at least 2 terminals on my Denon X7200W - seems to be the Surround Back...