anphex
Addicted to Fun and Learning 32 From Berlin, Germany
- Joined
- Messages
- 776
- Likes
- 1,144
Latest activity Postings About
-
-
anphex reacted to CPTX's post in the thread How to elevate a floor standing speaker for higher tweeter axis while keeping it pretty? with
Like.
I always start with the easiest, lowest cost, completely reversible without any remnants of a trial options first. In this case that... -
anphex replied to the thread How to elevate a floor standing speaker for higher tweeter axis while keeping it pretty?.Thank you everyone, many great suggestions in there. I thought about it for a while. @Mnyb The tweeter axis of the KEF Reference 3 Meta...
-
anphex reacted to CPTX's post in the thread How to elevate a floor standing speaker for higher tweeter axis while keeping it pretty? with Like.
Oh, I see you just need to raise them ten inches I’d buy some tile of your preference, cut it to cover concrete blocks, and then adhere...
-
anphex reacted to kemmler3D's post in the thread How to elevate a floor standing speaker for higher tweeter axis while keeping it pretty? with Like.
I'm just going to be "that guy" - At 20cm high you can 3D print such a stand in 1 or 2 parts per side for about $20-40 in materials...
-
anphex reacted to CPTX's post in the thread How to elevate a floor standing speaker for higher tweeter axis while keeping it pretty? with Like.
^^^^^These are available from multiple brands and in multiple sizes and finishes. If you like the look of stone, but want a soft...
-
@Talisman. I can scare you further: My dealer charged me 506 USD for a replacement driver. One expensive glas of Orange juice..
-
I've read Stephen King horror novels that scared me less than this story
-
anphex reacted to voodooless's post in the thread Multichannel audio on a Pi will get a whole lot easier and cheaper! with Like.
The release date of the Raspberry Pi 5 is growing ever closer, although it’s still not clear when exactly it’s going to be released. So...
-
anphex reacted to SteveC's post in the thread How to elevate a floor standing speaker for higher tweeter axis while keeping it pretty? with Like.
Tilt back will affect both the image height and dispersion. I think what you're trying to achieve is an image that sounds like it it...
-
anphex replied to the thread How to elevate a floor standing speaker for higher tweeter axis while keeping it pretty?.They need to be smooth to not damage the floor or anything, that's why "soft" wood or smooth granite/marble are the only options that...
-
anphex replied to the thread How to elevate a floor standing speaker for higher tweeter axis while keeping it pretty?.Thank you! It wouldn't need to fit 100 %, it could be very well a little larger than the base. Then again a custom made base for...
-
anphex reacted to digitalfrost's post in the thread How to elevate a floor standing speaker for higher tweeter axis while keeping it pretty? with Like.
Given that these are 205 x 462 mm at the base, it'll probably be hard to find something that just fits. Since you are in germany...
-
anphex posted the thread How to elevate a floor standing speaker for higher tweeter axis while keeping it pretty? in DIY Audio Forum.Lately I am a happy owner of a pair of KEF Reference 3 Meta. They replace my Nubert NuVero 170, which had a higher tweeter axis. It's...
-
anphex reacted to radix's post in the thread Review and Measurements of Benchmark AHB2 Amp with Like.
You should lookup other threads about doing side-by-side amp comparisons. You want to get them level matched and have an easy speaker...
-
anphex replied to the thread Eversolo DMP-A8 Balanced Streamer/DAC Review.I have absolutely no idea of pcb design, but this board is so pretty I could imagine it hanging framed on my wall somewhere.
-
-
Loading…
-
Loading…