serkankster
Member
- Joined
- May 27, 2021
- Messages
- 6
- Likes
- 0
I am considering buying 2 Monolith subs over some other subs which have built in PEQ. I’m not clear what the ideal way of adding DSP would be. Currently my setup includes DAC and an integrated amp. I will need to buy a miniDSP and most probably a preamp as well. One possible way to do this would be having miniDSP between the preamp and the amp, and then connect the subs directly to the miniDSP. But then it sounds like i would be digitizing the signal after the preamp and this is probably not optimal in terms of the quality of the signal the amp receives. Curious if anyone has recommendations? I never had a preamp before, but do i need to find a preamp with all active outputs, and pass the signal to the subs through DSP while using a separate output for the main amp? Thanks in advance!