What crossover points should I set?

[robotwizard]

Finally took the plunge on two MiniDSP Flex and would like advice on what crossover points to set. I'm thinking 50Hz for the GoldenEars and 80Hz for the Maggies.

Room 1: Large living room with 30' foot ceilings (~18' x ~13x')
GoldenEar Triton One.R driven by 2x Outlaw 2220
2x sealed Adire Audio Brahma 12" subwoofers driven by 2x Dayton Audio SA1000

Room 2: Small loft with normal ceiling (~12' x ~11')
Magnepan 1.7i driven by Buckeye Hypex NC502MP
CSS Audio SDX12 w. 2x passive radiators driven by Crown XLS 1502

Many thanks in advance!

 

[HarmonicTHD]

There is no one fits all rule. I’d start with 80 in both cases, take REW sweeps at the MLP and see what is what. First optimize sub position than see if you have any „dips“ left and if they can be optimized by changing the xover