Power supply for Topping D50s

[mycroft holmes]

Hello forum,

Does anybody know if 5V/0.8A is enough for a Topping D50s?

I see that Topping website shows a picture with P50/A50/D50, and in this configuration the P50 would emit 5V/0.9A, so this should be enough, but I've never seen a picture with a fourth component (which would drop the amperage to 0.8A).

thanks
MH

 

[gvl]

Given it comes with a USB cable for power it shouldn’t draw more than 500mA, so a 800mA supply should be plenty.

 

[raif71]

As far as the power, I think not enough. I have now connected D50s/A50s/M50 to the P50. When everything is on, I would noticed that no sound is heard when M50 is playing, then D50s will reboot and only after that sound will be heard. I have tried combination of starting first M50 or D50s but D50s will always reboot when M50 first start playing. When I use separate power for D50s, then it is ok which makes the 2nd usb port of P50 useless.