mcdn

We really need a $100 easily programmable equivalent to the MiniDSP 2x4HD. It’s just painful to see all these passive XO threads!

That’s the distinction between physical and perceived acoustics. A room mode remains a physical characteristic of the room’s acoustics...

That’s a bit reductive though. Of course DSP can’t change the environment around it. In the OP’s case it probably can make the...

Isn’t the entire point of room correction that it fixes poor acoustics? It can’t fix everything, but it can fix most things that people...

It sounds louder because of the extra sidewall reflections. And yes it can be improved with DSP. You might need to make some manual...

Ouch. We all remember the cold temperature issue with the bass response of the Neumanns. But that was a great result in the end...

I will PM you with something more fun to test, but are you saying the Klippel is being inconsistent?

Personally I’d be fine with that - it’s a DAC, it measures fine. It has one or two interesting features, here are some more detailed...

My current thought is to do quicker reviews on them with a few measurements so that I can spend time on other products. That is...

@amirm yet another lovely device, but it’s getting a bit repetitive. Can we have some speaker reviews again? The Klippel must be...

Maybe kind of? There's a reason we use THD+N or SINAD rather than eyeballing a noise floor. Noise floors are artificially lowered...

Hi! No I don't think I did. This module is actually BTL with 2 TPA3255 chips to give 4 channels, as corrected in the original post...

Standby level sensors are a most tricky affair, it is very hard to find a sweet spot that works for most scenarios. IME, one needs...

To add a bit of detail - ideally you would have some hysteresis so "on" is triggered at e.g. 2mV, but the off timer isn't triggered...

For 2Vrms as max input (unbalanced), your current choice of 2mV is -60dB. I would suggest -70dB and -50dB. Any lower then -70dB and...