gain

Hi everyone, Can someone explain how the gain is implemented in the Nilai power amplifiers? The amplifier has built-in preamp providing three levels of gain (12, 22 and 28 dB). You can adjust it using a switch. But HOW is this sensitivitylevel built in? Thanks for explaining me

I'm trying to use a sensitive pair of headphones (Focal Utopia, 80 ohms impedance, 104 db sensitivity) with an amp that provides 20 db of gain (gain is fixed: no low/high/medium/etc). The DAC has 4 output voltage options (via RCA), which I believe are controlled in the analog domain: 0.124 Vrms...

I have a Neumann KM184 SDC mic connected to a SSL2 audio interface through a 10 meter Mogami xlr-cable and notice that it requires me to set the gain to about 7-8 out of 10 to land at levels of about -24 to -18 db. Being aware that mic signals are weak but given that the preamp gain of SSL2 is...

Slate Digital Fresh Air vs. Fabfilter Pro • Q³ which is better to bring the air into music?

Is 2Vrms enough to achieve the maximum SPL when using the -10dBV input of JBL 305p MKii? +6dBV = 1.995Vrms?

When I connect a channel strip into an interface which LEDs are known to be less than perfectly precise, what is the "best" way to detect that signal is getting distorted? I would imagine passing a sine wave of some sort, but how exactly / using which software?

Hi everyone, (Sorry mistakes edited) After reading many forum threads online and with the help of calculators etc, calculations made but think I have some errors. I apologise for the long post, I will do my best to keep it concise. Objective: With the limited specifications available, I would...

So, i didn't well speak what Gain level on specification on amplifier means exactly, maybe it act like a sort of compression on sound quality? For example: JDS Atom Labs 1.0W 32ohm: Low gain=x1.0/High Gain=x4.5 THX AAA 789 Unbalanced 1,8W 32ohm: Low gain=x0,33=-10dB / Medium Gain=x1.0=0dB /...