You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser.
-
-
S
Agreed. I am currently refactoring in order to modularize the input path. This will facilitate not only SPDIF, I2S and ADAT input but...
-
S
Direct display support within DSPi is unlikely, as the RAM usage would be very high. ESP32 devices such as the ones that you posted...
-
S
We now have a master volume control, while input preamps have been made per-channel with optional linking and moved to their respective...
-
S
I have just released DSPi Firmware v1.1.3 Beta 4. This release enables support for 96KHz input up to 24-bit and fixes the I2S/SPDIF...
-
S
The plan is for the RP2040/2350 to continue to handle control and DSP. Feature creep will be addressed in the form of control...
-
S
Thank you! I intend to support IR remote, external GPIO control, BLE (on the W boards) UART and I2C interfaces.
The “official” custom...
-
S
It's somewhat useful if you work with mixed formats in your OS, like 44.1 + 48 + 96 kHz or some variation of at least two of them. I've...
-
S
I would suggest using the most recent firmware release with Windows support, as that is the one to which my advice pertained. :)
This...
-
S
The master volume control will remain constant from one input to another but not necessarily from one preset to another. I might make...
-
S
The working principle for host volume control here is essentially identical to that of all other USB audio devices, with the exception...
-
S
Not exactly (yet). Take a look at the loudness compensation controls below and see the effect of different settings upon the...
-
S
Upmixing (initially three channel stereo but eventually N channel) is another planned function that will be fairly straightforward to...
-
S
Not necessarily. This functionality is more of a long term plan but each I2S state machine can run in full duplex mode, providing as...
-
S
I have ordered a set of six PCM5102A modules, which should be very helpful for comprehensive testing until I have time to design the...
-
S
SPDIF input is a priority and I have been working on it continuously. I expect to have a production-ready implementation by the end of...
-
Loading…
-
Loading…