Reddoc's latest activity

Many years ago I built for a friend a Hiraga MC pre amp with self set turret boards. External power supply with line filter and + an -...

Depending on internal resistance of the battery - any dynamic load (varying current) will result in a varying voltage on the output of...

Basically yes. If you attach a battery to the APx input you get a super flat and low FFT result, not much different than shorting the...

Don't give them any ideas...or ScanSpeak and SB Acoustics will raise the price of the drivers. Something like this should be kept...

How do you explain a loose chicken and a papery cat in one day?

I've been trying to make design of a small, simple-to-build and inexpensive speaker that would not need a sub at least for music...

The Audiophonics case top can be a little finicky to re-seat properly, but it's a 1-2 minute job, not a 4-hour one.

Are batteries electrically "silent" ie perfect voltage / current source with no extraneous noise? Obviously things change as battery...

Will be ordering 56 of them to build Quad force-cancelling low profile WaveformingTM subs for low rattle videowall periphery.

56 seems a little low. Definite risk of an underpowered setup.

I went against some of the recommendations and bought a couple of the Scan-Speak Revelator 13" drivers for a very good price. Am going...

Cross posting this from the SBS.1 thread here as well. Shared from a customer with two Inkognito subwoofers. In-room measurement and...

Currently we only have a direct sales model, and with the current margins there's not really room for a distributor model - and there...

@carlob mentioned that my subwoofers looked interesting and suggested I created a thread to share a bit more information, including of...

Hello everyone, Sounds like a lot of great feed back. I will be getting my Nilai Mono's today. I was very content with the NAD c399...