M
mackat
Active Member
- Joined
- Messages
- 217
- Likes
- 344
Latest activity Postings About
-
-
Mmackat reacted to acd's post in the thread Introducing the Phono Cartridge Measurement Library with
Like.
Audio Technica Art 9 from 2017. Not used much, i.e. assumed less than average for an MC at this age. Tracks 70mu on the old Ortofon test... -
Mmackat reacted to Thomas_A's post in the thread Introducing the Phono Cartridge Measurement Library with Like.
Shure V15V HE Notes: The original 1982 V15V with hyperelliptical stylus Bought used, no information of stylus age Stylus looks fine...
-
Mmackat reacted to JP's post in the thread Introducing the Phono Cartridge Measurement Library with Like.
It’s not academic - lots of people optimize loading, and that number grows as people become more aware. One can buy loading plugs and y...
-
Mmackat reacted to Balle Clorin's post in the thread Introducing the Phono Cartridge Measurement Library with Like.
Something is horrible wrong with the response here, check your settings . This is just misleading about the cartridge response I am...
-
Mmackat reacted to wpbilderback's post in the thread Introducing the Phono Cartridge Measurement Library with Like.
Pickering V-15 with Jico D1507DJ NUDE conical stylus Notes: Resubmitting using the CBS STR-100 test record instead of the CBS STR-130...
-
Mmackat replied to the thread Introducing the Phono Cartridge Measurement Library.I think I was using an SH-100S headshell, so perhaps a couple grams higher
-
Mmackat reacted to JeffS7444's post in the thread Phono Cartridge Response Measurement Script with Like.
Ortofon 2M Red, Parks Audio Waxwing, no Derumble Same, with Derumble feature activated.
-
Mmackat replied to the thread Introducing the Phono Cartridge Measurement Library.Thanks, that measurement was taken using the stock SL-1200GR arm.
-
Mmackat reacted to watchnerd's post in the thread Introducing the Phono Cartridge Measurement Library with Like.
Nice, what arm were you using?
-
MProbably low risk being just released, but I never buy carts or styli from Amazon anymore. The percentage of used and returned or...
-
Mmackat replied to the thread Introducing the Phono Cartridge Measurement Library.The VMN45xML works superbly on a VM5XX body when loaded at 36k - perhaps even a little flatter than on the VM7XXx body, though that's...
-
-
Mmackat replied to the thread Introducing the Phono Cartridge Measurement Library.Just got mine - to me, it's a definite improvement over the previous series in terms of frequency response. The resonance peak has been...
-
-
Mmackat reacted to narud's post in the thread Introducing the Phono Cartridge Measurement Library with Like.
Audio Technica vm745xml might as well add my measurement. using the modded art djpre with the 0pf setting. this is a more of a high...
-
Mmackat reacted to JP's post in the thread Introducing the Phono Cartridge Measurement Library with Like.
Audio-Technica VMN45xML Here are some comparisons of the VMN45xML stylus in the 700 and 150 bodies. For each typical OEM loading...
-
Mmackat reacted to JP's post in the thread Introducing the Phono Cartridge Measurement Library with Like.
Audio-Technica AT-VM745xML I was really hoping AT did something useful with the boron cantilever on this one. Sadly, it's principally a...
-
-
Loading…
-
Loading…
