LSPhil

These speakers have low sensitivity primarily because it's technically challenging to achieve deep low-frequency response with high...

111.5-9.5=102dB Only one Speaker. I better get out of this room. the quietest passage is 87 dB and max 102 dB. I think I'm leaving

:D The amp doesn't know anything about near-field or far-field. :D More efficient speakers are probably part of the solution. Pro...

I think you're exaggerating with those 800W. 800W->29 dB+82.5=111.5 dB Gentlemen, that's really too much

I have no idea what sort of "blind testing" articles you're talking about, or why they were published, but let me say this, just in case...

I like your HP differential input rack mount scope. I had 2 of them and loved them very much. That HP 100 Mhz scope is no slouch either.

I have been doing active crossovers since the 1970's (homemade analog). With my CBT36K speakers I first used the miniDSP Open DRC-DA8...

This is a review and detailed measurement of the Minidsp Flex audio signal processor. It was sent to me by the company and costs US $475...

Can I play back my understanding of the inverted phase issue? With thanks for all the investigation and explanation that members have...

My definition of a good amplifier (or any other part of the audio chain) is that it's objectively below a threshold (which is not nearly...

My recommendation for you would be a TPA3116 based amplifier for 50 euros.

Imagine you have an amplifier with only 25 watts, which corresponds to 14 dB. Now, add these two numbers 93+14, and you get 107 dB. I am...

I’m curious about this preoccupation with heat. We have a Denon receiver that has been on for the last 22 years inside an entertainment...

You can make fun of them, but that's what these ladies are capable of ... Could you?

You need to think about digital recording differently than analog recording. 24 bit digital has many orders of magnitude more dynamic...