ebslo

or a signal long enough to reach some kind of steady state or for example thermal equilibrium . meaning looking at the system now or in...

btw there is no content in the above video past 16-17kHz (I assume due to YT compression) For these tests one is better off with REW:

I don't have a WiiM, but it looks from their howto's that it doesn't support all-pass. It's a type of PEQ filter, but they only mention...

The room has massive influence on group delay. Therefor the room and sub placement should be considered jointly with the sub. EQ for a...

Humans are not very sensitive to group delays at low frequency...

Do you have manual control over the room correction filters on the WiiM? If so, you may be able to fix this with all-pass filters. I do...

You show L and R speakers, but not Both. I usually don't listen to music through just the left or the right. At my place there's an...

For sure. I didn't mean to compare against REW MMM. I just wanted to show mostly, as usual, the predicted FR in its room correction...

Hey, so I figured I might as well post this in case someone else is looking to see what Dirac is actually doing in terms of room...

If the correction is made only to the measurement converted to minimum phase (i.e. we are not correcting phase beyond minimum phase...

I'm not saying they should be using the same PS for the 9040. No, the point I was making is that when Purifi used a Hypex power supply...

Trying to follow along, but it's hard because it appears a post in the quote link chain was deleted. Are you referring to the 1ET400A...

I think it was just a typo, I assumed they meant "fraught".

Want to emphasize "quick and dirty" again. Will be following up with a more dialed in IMD and power sweep measurements after tweaking...