BJL

I am a recording and performing artist who worked with modular synths from the early 2010s until a couple of years ago. You can find me...

This is certainly correct. My first gen Max stopped working after about three years, a service place was able to get them working again...

Hello, The goal of Magicvinyldigital.net is...

I get it, it feels like you’re throwing away something you paid for when you down sample to 48khz. That said, if you’re using a high...

Pretty much anyone using room correction with any AVP/AVR is having their source content resampled. It's a non-issue as the benefits of...

Please lay off the childish insults. The fact is that a section of the customers do not need anything more than what is needed for UHD...

An art exhibit in Berlin, Germany featuring the heads of Musk, Zuckerberg, Bezos, Kim, Warhol, and Picasso...

It is on page 134 of the LX505 manual: "When there are speakers that have been set to "Small", set the Hz under which you would like...

I would actually need more properly mastered Atmos content to enjoy on my so inadequate on wall Atmos setup. While obviously mixer can't...

Not sure why you need to follow the posts in this thread with such hardcore dedication. We all heard your view and took notice of it...

I accept this as an ideal. However, I do not think that a setup that conforms to any of the alternatives posted in Dolby's guidelines...

The manual for your processor should explain that the outputs labeled front or back "height" can be designated in one of three ways: as...

I have eight SVS Ultra Elevations, with six designated top front, middle, back and mounted down firing positioned per the instructions...

Easy peasy. I use a pair of identical 8 channel amplifiers (one for ear level, one for the Atmos positions), bought a set of identical...

I suspect that for most folks, some degree of compromise is necessary. I just tried to get a close as possible to the diagram in the the...