Fraxo
Active Member
- Joined
- Jan 1, 2022
- Messages
- 100
- Likes
- 27
First I'd like to thank any of you who comment, I appreciate your time reaching out to help!
So I'm not highly familiar with different filters in hardware and what they cause. If it's similar to LP filters in the digital audio engineering domain - then I'd assume some pre ringing could be an issue if it's linear, phasing could be prevalent in others, high frequency rolloff etc...
I care a lot about transient accuracy for subtle mix work, but in hardware the terminology is not so clear to me and I assume there's more to it...
Could you please simplify this for me for the different choices in hardware?
1) Which do you recommend for DX3 Pro+ (photos below) for transient accuracy (percussions\plucks) and why.
2) What main artifacts are to be expected with music.
3) What's the most common choice in the Hi-Fi world? (curiosity mainly).
.
Thanks again people!
So I'm not highly familiar with different filters in hardware and what they cause. If it's similar to LP filters in the digital audio engineering domain - then I'd assume some pre ringing could be an issue if it's linear, phasing could be prevalent in others, high frequency rolloff etc...
I care a lot about transient accuracy for subtle mix work, but in hardware the terminology is not so clear to me and I assume there's more to it...
Could you please simplify this for me for the different choices in hardware?
1) Which do you recommend for DX3 Pro+ (photos below) for transient accuracy (percussions\plucks) and why.
2) What main artifacts are to be expected with music.
3) What's the most common choice in the Hi-Fi world? (curiosity mainly).
Thanks again people!
Last edited: