time alignment

Hey! I'm trying to set the delay between the mains and the sub. I followed this guide, but I'm getting significant cancellations, same result when using the tool in the WiiM app. I don't have these one to show, but it was really bad. So I started increasing the delay on the mains by 2 ms and...

Using REW I measured system delay of my subwoofer referenced to my main speaker and it’s 3ms. I used this delay to crossover at 90hz but unfortunately it gave me a dip. Then I tweak the delay with tries and errors and found that 7ms with phase inverted gave me the best SPL performance on...

I'm planning adding a subwoofer to my system, but I don't want to use external DSP. Are there any guides I should follow in order to phase (/time) align the subwoofer to the mains solely by positioning and through the sub's own dsp settings (crossover, phase, etc.)? Can it be done? Thank you

I see some speaker brands claiming to be physically time-aligned, usually by titling the speaker back so the tweeter is farther from the listener. Is this truly effective? It seems if there’s a positive effect, it would be for only one narrow listening position (which may not be where you’re...

Edit: Please find here (on this thread) and here (remote independent thread post) the Hyperlink Index of this thread and some of my related posts in remote threads ************************************************** Edit on July 7, 2024 Just for your reference,,, The latest system setup of my...