Search results

Hi guys! So I was hoping to get a clarification of how the GAIN amp know works on an amp and how it relates to my AVR, MiniDSP etc on the chain. To give specific details.... My AVR is the Denbon 3800h and I have the LFE output connected to a MiniDSP. From that MiniDSP some outputs connect to...

Thats my other thread. I was able to get the Crown to work better by bridging and presenting an 8ohm load. The crown did manage to handle much more demending settings than the Fosi in stereo mode but as I got greedy and started to make my low frequency settings more demanding, that is when I...

I honestly never knew there was a difference of voltage vs current in this way. Now I must learn about this more :D

I didn't do parallel so it was an 8ohm load and worked prefectly. I'm considering adding a 3rd shaker and run two of them parallel on one channel (2ohms) and a single shaker on the other (4ohms) I wonder how that will turn out

I actually noticed that according to spec the 1002 in bridge 8ohms gives the same power total as 4ohms per channel so just for fun I ran then in series bridge and it actually is able to handle the settings it couldn't handle in stereo mode. In fact I got is of the shakers to bottom a little so...

Confirmed...the xli 2500 handles them like nothing...in fact is over kill as I can make the bottom at anything over 1pm to 2pm on the dials.

Yeah I had one MANY years ago and paid abotu the same you did...time surely have changed lol

Yep which is why I decided to move up to 2500 for more headroom

Where was the 1002 shown delivering 350w per channel? I see Amir got 281Watts and not sure how is that been tested since for the shakers I am pushing much demanding frequencies. Like Amir has shown amps do not deliver their power evenly accross the frequencies, like on his review of the NX3000D...

??? What 2 amps? If you are referring to my post about the Fosi that is completely unrelated or I guess maybe related as both seem to have issues handling the power requirements. But the problem is the xls 1002 was able to handle it for a while (after I boosted the bottom frequencies more which...

Dang 250 for the 2500. .. home times have changed

Thanks guys. I will report back tomorrow about how the xli 1500 did.

Hi! So I just got a 1002 yesterday to replace the Aiyima 07 max I was using (two of them) to run two Dayton BST-300ex. I setup one shaker per channel (4ohm shakers). Everything was doing great, better than the Aiyimas. Today after doing some tests I went upstairs to do other stuff and then came...

Excellent, thank you!

Hi! I am just curious how to tell the guage of this RCA cable based on this diagram since the info is not provided on the description that I can see.

I do keep a fan on them and it seems to keep cooler with the 48v 5A than the stock psu but still same results in stereo. I was just surprised how the measurements didnt deliver for this particular case. At the end of the day I will probably just grab an XLS1002 or so.

It has nothing to do with "struggle". Read my previous reply....

I was using the V3 stereo as an example of what I tested. Based on the tests here showing enough power in stereo mode to drive both to more than enough performance, I was disappointed to find out the tests here did not reflect real life performance in a situation like this. So it was a simple...

And to clarify the same happens to the aiyima 07 max so I have to run each shaker with a single 07 max in bridge mode and then it works brilliant

While testing the v3 stereo mode with the 48v 5amp running dual Dayton BST-300ex shakers the amp is unable to handle it and the sound keeps cutting out. Is this maybe a case where the 48v 10a can help or something else going on?