Punter

A straw man fallacy occurs when someone distorts or exaggerates another person’s argument, and then attacks the distorted version of the...

You should have written that in all caps if you want us to know what you wrote is true ! :)

Well done OP, you have used a USB isolator to remove the (slightly) audible noise from a mouse being operated. Now explain how a...

How about a GSM mobile phone signal? How about irrelevant? *Groan*

All radiated interference becomes conducted when it couples onto whatever conductor they are interfering via. I think @KSTR was...

So what magnitude are these artefacts? Microvolts...... picovolts.... I love how the cable crowd grasp at these minute defects and...

I agree, if you load the supply, you will see more ripple but as far as mains artefacts go, you'd really need to be putting the PS under...

What you write is only right as long as the PS is not loaded. As soon as you place a load at the output, you will be able to see all...

If diode noise was making it onto the DC rails, you'd have a really bad power supply. Either it would be faulty or just poorly...

Man! There is some truly whack stuff on that site! " PUT ON AND DIVE IN. UNCOVER UNBELIEVED DEPTHS AND SUBTLE DETAILS IN THE...

WAAAHH! Light dimmers, they have the sawtooth from hell radiating out of them. No studio should ever be equipped with mains rated...

Common mode noise reduction is a feature of balanced audio circuits connected with twisted pair cable. RCA started life as an RF...

Money grab ... the almost obligatory risers as well ... and don't forget the audiophile fuses in the mains path... they are even more...

I used the word "buffer" to illustrate the separation of the AC source from the DC output. I realise it's not the exact, proper way to...

Pretty close on the resin, Phenolic :) Used in all exterior and marine ply.