P

Latest activity Postings About

    • P
      As ex dj id think i would jump on any dac with 60 million settings to choose. But i fell in love with Quad 34 simple yet effective tone...
    • P
      The state of the DSP market If you wish to implement DSP, you will need (1) software to design filters, and (2) a way to use these...
    • P
      Pieter1267 replied to the thread B&C 15DS115.
      Im sorry Heinrich but your English is a bit difficult to follow sometimes. Many suggested taking more measures. If you did too then i...
    • P
      Pieter1267 replied to the thread B&C 15DS115.
      Ok here is an update. I decided to do some new basic measurements on all speakers, not just MLP but also on axis 30cm and 1meter. Some...
      • sub 2 the ultimax ii with leaky cab.jpg
      • sub 1, the older ultimax.jpg
      • left main.jpg
      • right main.jpg
      • mmmcurrentresult125hzxo.jpg
      • 10300mmm.jpg
      • MLPfulrangebeforeallpass.jpg
      • sub 2 after fix, 125xo.jpg
    • P
      Pieter1267 replied to the thread B&C 15DS115.
      Small update. Went back to make basic 1m measurements of all speakers. Turns out im a failure for building diy flatpacks, as sub 2 had a...
      • 1000003316.jpg
    • P
      Pieter1267 replied to the thread B&C 15DS115.
      Yup. Im gonna put the brakes on the whole project and do some more reading and studying. And hornresp and Vituixcad.
    • P
      Pieter1267 reacted to 3ll3d00d's post in the thread B&C 15DS115 with Like Like.
      Design for your actual use ie how loud do you really need it to go? Size the amplifier and the port to achieve that (remembering that...
    • P
      Pieter1267 reacted to Heinrich's post in the thread B&C 15DS115 with Like Like.
      ChatGPT says, that the baffle's deflection is driven by the inward pressure. I asked for a calculation, but it circumvented it by...
    • P
      Pieter1267 replied to the thread B&C 15DS115.
      guys im contemplating making port area smaller. Il pay a bit in chuffing problems but my tuning is now at about 1000watt input with...
    • P
      Pieter1267 replied to the thread B&C 15DS115.
      Those are only valid if other solutions than changing driver are option. But its not. I decided i want to try a different driver and b...
    • P
      Pieter1267 replied to the thread B&C 15DS115.
      GSG is American. With Current USA > mainland Europe tarifs that will be a $1700 flatpack. But maybe good starting point. Im gonna ask...
    • P
      Pieter1267 reacted to MAB's post in the thread B&C 15DS115 with Like Like.
      Like this? I think with determination and perhaps a bit of help, this is achievable. This is actually a flat-pack kit for a 15" sub...
    • P
      Pieter1267 reacted to Azrael's post in the thread B&C 15DS115 with Like Like.
      Seems that they're using SketchUp too :):
    • P
      Pieter1267 replied to the thread B&C 15DS115.
      That looks like 50 years away from anything ill ever be able to make. It looks amazing! Can you figure out something like those sub...
    • P
      Pieter1267 reacted to Azrael's post in the thread B&C 15DS115 with Like Like.
      I make my case designs with a slightly older version of SketchUp Make, but that's after I've already done the case simulations, so I...
  • Loading…
  • Loading…
Back
Top Bottom