Paweł L's latest activity

You can see the difference here as an example: Topping EQ: RME EQ (from this thread where it also mentions a similar Bluesound...

Yet another overly perfect DAC. It's time for Topping to make them cheaper, not even better in an even more inaudible way. But I guess...

Yeah….yeah Topping, you’ve finally given us peq, but we now want streaming as well - Tidal, Qobuz, Spotify, Apple Music, Amazon music...

Great! Now I can properly set the EQ, just like on my old system:

I see. Most likely something resembling inductor in series for baffle step correction around 120-150zHz, plus capacitor with resistor in...

The drivers sensitivity/efficiency is actually so low - heavy cone/voice coil assembly to keep FS low, and then you just can't make the...

Thanks for sharing! Not a huge surprise given Dayton’s recent history that these do not measure well. It is not that difficult to do...

The edge diffraction would be one thing. But I think because upper mids, the 700-2k range is pulled up, the dip counter acts brightness...

+/-3dB is not really a bad alignment in such things. Sometimes more parts really aren't warranted if it still doesn't fix the issues for...

The higher Fs hurts, as did not want to eq to get decent bass. Currently, I have only listened to them in a slightly undersized vented...

Before he passed, Rick Craig had shared how PE quality and his interactions with them had shifted lately. At the time, we had both...

Along with the potential leakage issue, this higher distortion disqualified these for use in Directiva projects. Have heard the RST...

The power has to go somewhere. To get the SPL, you'll be burning up power in the loudspeaker and with less (a tiny fraction) being...

Red. https://audiosciencereview.com/forum/index.php?threads/best-bang-for-your-buck-iem-poll.44898/

I do gentle EQ to bring the 5128 measurement by resolve, into this preference band - mainly the 425Hz region and deep bass And wow...